Anhui Hummer Dynamo Co., Ltd
Tel:+86-551-3441231 3441230
Fax:+86-551-344299191
E-Mail:sales@allwindenergy.com
Contact Person:Mr.Tan
Website：en.wind-turbines.cn
MSN：hummer-606@hotmail.com

A new generation of wind turbines

1, according to the greater torque, the longer leaves, leaf length for each additional 20%, double the capacity ofwnd power generation on this principle, the fulcrum of this patent uses three leaf blades as compared with the existing single-pivot bearing capacity several times to enhance the existing technology impossible to solve the problem, leaves can be made larger, described the fulcrum blade 3 as shown in Figure 1, a blade pivot joints ○ 11, pivot support two rotating circles ○ 8, pivot 3 flange ○ 5.

2, according to the lift leaves the upper half is the fact that 75% of the second half of this patent ○ 8 and the transmission support ring between the flange ○ 5 with a number of vice leaves ○ 17 with the existing technology than the impeller diameter, the same wind turbines torque can be doubled and redoubled.

3, for very large leaves of this patent may be sub-blade manufacturing, staging, on-site combination, to solve the existing large-scale blade manufacturing, transportation, lifting and other difficulties.

4, according to the surface more than the plane lift this principle, the patent with a chine of the blades, wind generators and more a force between the blades, thus you can think of, large rear wing aircraft can control the activities of aircraft movements wing produced an important role in increasing strength while enhancing the impeller blade torque. Is proved by experiments, the effect is obvious.
5, this patent uses the total power generating method of decomposition, example: The total power of 10 megawatts for five 2-megawatt generators, five generators were set up around the impeller Backstop ○ 10, they can always cut out, cut into the . In the wind generator when you cut into more than an extra impeller pivot (increased load), the weak wind generator when you cut into small (less load), start the wind speed is low, may be zero-load start. Does not affect the machine operation can be required to repair the generator at any time cut out, cut into, with easy maintenance, generator-round play in the transmission process is only secondary support, the other between the various generators has to do with a brake disc support wheel the main support.